This guide walks you through pairing a Socket Mobile S740 scanner with Lightspeed Retail (X-Series) POS App. We'll walk through each screen in the setup process, including a few helpful tips along the way.
Related Lightspeed article: Setting up your Socket Mobile scanner
Quick Links to Steps:
- How to Enter Pairing Mode
- Open Hardware Settings
- Choose Scanner Brand and Model
- Pair Scanner with iPad
- Test the Scanner
- Confirm the Scanner is Connected
- Troubleshooting and Support
Before you begin
Make sure you have the following ready:
- Your iPad is powered on and running the Lightspeed Retail (X-Series) app.
- Your Socket Mobile scanner is nearby and sufficiently charged.
- Your scanner is powered off.
How to Enter Pairing Mode:
- Press and hold the scan button.
- While holding the scan button, press the power button to turn on the scanner.
- Continue holding the scan button until the scanner begins blinking blue approximately once per second.
The blue light blinking approximately once per second indicates that the scanner is in Bluetooth pairing mode.
Important: Put your scanner into pairing mode before starting the setup in Lightspeed.
Open Hardware Settings in the LS X-Series POS App
- Open the Lightspeed Retail (X-Series) app on your iPad.
- Navigate to Settings by clicking the icon directly beneath the date and time in the top left and then selecting Settings
- Select Hardware from the left-hand menu.
- Under Barcode scanners, select Add a barcode scanner.
Choose Scanner Brand
- Select Socket Mobile as the scanner brand.
- Select Next.
- Choose Socket Mobile 2D (the S740 is a 2D scanner).
- Select Next to continue.
- Lightspeed will display instructions for powering on your scanner.
- If you haven't already done so, follow the pairing-mode instructions above (How to Enter Pairing Mode)
- Your scanner should be blinking blue approximately once per second.
- Once your scanner is in pairing mode, follow the prompt in the LS X-Series POS App to scan the iOS Mode barcode displayed
- This barcode will make sure the scanner is in iOS Mode in order to be compatible with LS X-Series POS App
- Click Next
Pair Scanner
After scanning the setup barcode, Lightspeed will search for available Bluetooth devices.
- Select Choose scanner to pair...
- Find your Socket S740 scanner in the Bluetooth accessory list.
- If there is more than 1 scanner in the list, match the ID in the brackets following Socket S740 with the last 6 characters of the MAC ID of the scanner
Important: Before selecting your scanner, verify that the MAC ID shown in the accessory list matches the last 6 characters of the MAC ID printed on the top of the underside of your physical scanner.
Socket S740 [239D2E]
This helps ensure you are connecting the correct device, especially if multiple scanners are nearby.
- Select your scanner and allow a few seconds for the connection to complete.
Test the Scanner
Once the scanner is paired, Lightspeed will display the following test screen.
- Scan the sample barcode displayed in the setup window.
- Confirm that the scanned code appears in the Code from scanner field.
- Look for the Successful scan confirmation.
- Select Finish to complete the setup.
A successful test confirms that your scanner is communicating with Lightspeed.
Confirm the Scanner is Connected
- Return to Settings > Hardware in Lightspeed.
- Under Barcode scanners, your Socket Mobile scanner should now appear with a Connected status.
You're all set! Your barcode scanner is paired and ready to use with Lightspeed Retail.
Troubleshooting and Support
If your scanner doesn't connect, here are a few things to check:
Your scanner doesn't appear in the Bluetooth accessory list
- Confirm that the scanner is powered on and blinking blue approximately once per second.
- Make sure the scanner is in pairing mode before continuing.
- If necessary, restart the pairing process and follow the setup prompts again.
Your scanner appears, but won't connect
- Verify that you're selecting the correct scanner.
- Compare the MAC ID displayed on your iPad with the MAC ID printed on the underside of the scanner.
- Try restarting the pairing process.
The scanner connects, but the test is unsuccessful
- Make sure you're scanning the sample barcode displayed in the Lightspeed setup window.
- Confirm that the scanner is still powered on and connected.
- Try scanning the sample barcode again.
Questions? Contact iPOS Support!
🌐 Support: www.ipos-us.com/pos-support
💬 Help Center: https://support.ipos-us.com/hc/en-us
📞 Phone: (570) 906-8598 Option 3
✉️ Email: helpdesk@individualpos.com
Comments
0 comments
Article is closed for comments.