[LSX] How to Configure and Setup the Customer Facing Display app on an iPad

You will need two iPads to use the customer facing display.  One for the Lightspeed Retail X Series POS app and a second one for the Lightspeed Retail X Series Display app.

For the Customer Facing Display app to work properly you must be on at lest version 3.9.10 of the Lightspeed Retail X Series POS app and version 2.0.0 of the Lightspeed Retail X Series Display app.

Please note that both iPads must be on the same network to function.

1. Download and install the Lightspeed Retail X Series POS app on the employee facing iPad if that has not already been performed.
2. Go to the App Store on the iPad that will be used as the customer facing display.

3. Tap "Search" in the lower right hand corner.

4. Type "Lightspeed Retail" in the search box and tap Enter.

5. Scroll down until you find the result named "Lightspeed Display (X)" and tap the download/get button.

6. If you are prompted to enter your credentials for your Apple ID, enter them.
7. Once the download has completed, tap "Open".

8. You will be prompted to pair the display with Lightspeed Retail X Series POS.

9. At this point you need to go to the iPad that is running Lightspeed Retail X Series POS and log into your account accordingly.
10. Tap the three horizontal lines in the upper left hand corner of the screen.

11. In the left hand window pane, tap "Settings".

12. In the left hand window pane, tap "Hardware".

13. In the main window pane under the section named "Lightspeed Display", tap to enable the option named "Enable Lightspeed Display".

14. Once enabled, it will display the paring code that is needed on the iPad that will be using the Customer Facing Display app.

15. Enter the pairing code on the iPad that will be using the Customer Facing Display app and then tap "Pair".

16. You will now be prompted to allow the Display app to access devices on your network.  Tap "Allow".

17. The Customer Facing Display app is now paired with the employee facing iPad that is running the  Lightspeed Retail X Series POS app as shown below.